Adjustable Pillows Explained: Overall Height vs Individual Zones
LunartoShare
A pillow can be adjustable without letting you adjust each part separately. Removing a layer changes the overall height. Removing loose filling from one shared compartment changes the amount inside the pillow. Lunarto SoyNatura gives you another option: change the filling in four separate zones for your head, neck, left side and right side.
That means you can lower the area beneath your head while keeping more support beneath your neck. Or adjust the neck zone without lowering both sides. The difference is the ability to personalise the relationship between the zones, rather than choosing one overall height.
What does "adjustable pillow" actually mean?
The word covers several different constructions. Before choosing a pillow, ask what you can change, where you can change it, and how you reach the material inside.
| Construction | Typical adjustment | What to check |
|---|---|---|
| Removable layers | Add or remove layers to change overall height. | Whether the layers cover the whole pillow or allow local adjustments. |
| Loose filling in one shared compartment | Add, remove or redistribute filling. | Whether the construction separates the head, neck and side areas. |
| Lunarto SoyNatura with four zones | Change the filling in the head, neck and two side zones separately. | How to reach each zone and make small, even adjustments. |
These are construction differences, not a ranking of every pillow on the market. Some layered pillows offer more than overall height adjustment. Always check the specific model.
One pillow, four areas you can personalise
Lunarto has four zones, not four removable height layers. Its soybean fibre and 3D polyester filling can be adjusted within the different sections.
- Head zone: change the amount of filling beneath your head.
- Neck zone: adjust the filling in the support area beneath your neck.
- Left side zone: adjust this section separately from the centre.
- Right side zone: adjust this section separately from the centre and the other side.
Height, firmness and support are related. Adding filling can make a zone fuller and firmer; removing it can make the zone lower and less densely filled. These are not three separate mechanical controls, and the result also depends on how the remaining filling is distributed and compressed when you lie down.
Why changing the whole pillow may not solve a local problem
Imagine that the area beneath your head feels too high, while the support beneath your neck feels comfortable. Lowering the entire pillow changes both areas. With separate zones, you can first remove a little filling from the head zone and leave the neck zone as it is.
The reverse is possible too. If the neck section feels too full while the head section feels comfortable, you can reduce the filling in the neck zone without removing material from beneath your head.
This does not mean that a higher head zone or a lower neck zone is automatically the right choice. It means you have room to test different combinations instead of having to accept the same change everywhere.
Examples of zone-by-zone adjustment
Use these examples to understand the mechanism. They are starting points for testing comfort, not prescribed settings.
- You want a lower centre with fuller sides: remove a small amount from the head zone while initially leaving the side zones unchanged. This lets you test different support areas when moving between your back and side.
- The neck section feels too firm: reduce the filling in that section a little, spread the remainder evenly, and test again.
- One side needs a different feel: adjust that side zone without automatically making the same change to the other side.
- You change your mattress: reassess the setup on the new mattress before changing all four zones. The combination may feel different even with the same pillow settings.
The aim is a comfortable setup for you. A larger difference between zones is not necessarily better.
How you actually reach and change the filling
Adjustment is manual. You access the filling through the pillow's zip opening and work it within the internal sections.
- Put the pillow on a clean surface and open it following the adjustment guide.
- Choose the area you want to change first.
- Remove or add a small amount of filling. Keep removed filling clean and dry so you can put it back.
- Spread the remaining filling evenly within the section. Avoid leaving a hollow patch or a dense lump.
- Close the pillow and test it on your usual mattress, with your usual pillowcase.
- Make another small adjustment if needed. Change one area at a time so you can understand the effect.
For the detailed instructions and demonstration, visit the Lunarto adjustment guide with video.
Watch the filling adjustment in practice
Lunarto demonstration: opening the pillow and working with the loose filling. Use the written adjustment guide alongside the video.
What to expect from the feel
Lunarto is designed to feel structured and supportive. Adjusting the filling changes the setup, but does not turn it into a completely different material or an ultra-fluffy pillow.
You may find a comfortable setting quickly, or need several adjustments over time. There is no single timetable that applies to everyone. An unfamiliar feel is not proof that your previous position was wrong or that the new setting is correct.
Is individual zone adjustment worth considering?
It may be useful if changing the overall height has not addressed the particular area that bothers you, if you want to test a lower centre with fuller sides, or if you prefer a pillow you can manually fine-tune over time.
A simpler design may suit you better if you want a ready-to-use shape with no filling adjustments, prefer removable slabs, or want a very soft, deep sink-in feel. Personalisation offers more choices, but it also asks you to spend time finding your setup.
Frequently asked questions
Can I lower the head zone without lowering the neck zone?
Yes. You can remove filling from the head section while leaving the neck section unchanged, then test how the combination feels when lying down.
Can I lower the neck zone while keeping the head zone fuller?
Yes. You can adjust the neck section separately. Whether that combination is comfortable depends on your individual setup.
Can the two sides have different settings?
Yes. The left and right side zones can be adjusted separately. They do not have to contain exactly the same amount of filling.
Does adjustability guarantee that Lunarto will suit me?
No. It gives you more ways to change the setup, but comfort remains individual. Lunarto offers a 100-night home trial, subject to its return terms.
Written by the Lunarto team. Product construction and adjustment explanations are based on Lunarto's own product and demonstration materials. Published 13 November 2026.