Can you wash the whole Lunarto pillow, or only the cover? The complete pillow, including its filling, is machine washable at 40 degrees C on a gentle or delicate cycle. After washing, air dry it. Do not tumble dry it.
Those are our care instructions for Lunarto, not a general rule for every pillow. Here is how to make the full process manageable, from preparing the pillow to putting it back on the bed.
On this page
- Lunarto washing instructions at a glance
- 1. Prepare the pillow and its drying space
- 2. Machine wash at 40 degrees C on a gentle cycle
- 3. Air dry after washing
- 4. Check the inside, not just the cover
- 5. Shake and redistribute once fully dry
- What if you have a dust mite allergy?
- Frequently asked questions
Lunarto washing instructions at a glance
| Care question | Lunarto instruction |
|---|---|
| What can be washed? | The complete pillow, including its filling |
| Temperature | 40 degrees C |
| Programme | Gentle or delicate cycle |
| Drying | Air dry |
| Tumble dryer | Do not use |
| When can it go back on the bed? | Once the outer fabric and filling are completely dry |
1. Prepare the pillow and its drying space
Remove your outer pillowcase and any separate protective encasing. These are additional bedding layers with their own care instructions. You do not need to remove Lunarto's filling simply to wash the pillow.
Check the pillow's fabric, seams and zip before washing. Close the zip securely so that the filling stays inside. If the casing is damaged or filling is escaping, contact us before putting it in the machine.
Make sure your washing machine can accommodate the pillow without forcing it into an overfilled drum. Plan a place where air can circulate while it dries. It helps to have another suitable pillow available so you are not tempted to use this one before it is ready.
2. Machine wash at 40 degrees C on a gentle cycle
Place the complete pillow in the drum and select a gentle or delicate programme at 40 degrees C. Follow your machine's instructions for loading and detergent dosing.
Do not choose 60 degrees C or a hotter programme in an attempt to make cleaning more thorough. Our stated wash temperature is 40 degrees C. A recommendation for another pillow or another bedding item does not change that limit.
If you have already removed filling to adjust the fit, keep that retained material clean and dry. The whole-pillow washing instruction is not an instruction to wash loose fibres separately in the drum.
3. Air dry after washing
Take the pillow out of the machine and place it on a clean drying rack or another suitable surface that supports it while allowing airflow. Let it dry in a well-ventilated place and turn it periodically so different sides are exposed to the air.
Do not use a tumble dryer. Do not try to shorten the process with intense direct heat, such as placing the pillow on a radiator.
Keep the outer pillowcase and encasing off while drying. You want moisture to leave the whole pillow, not to enclose it too early.
4. Check the inside, not just the cover
A dry outer fabric does not prove that the filling is dry. Check several areas, including thicker parts, for remaining moisture. If you are unsure, allow more drying time before use.
There is no single drying time we can promise for every home. Airflow, room humidity, how wet the pillow is after washing and the distribution of filling all affect the process. That is why the finishing point is completely dry, not a fixed number of hours.
Do not put a damp pillow back into a closed encasing or storage bag. If a problem such as persistent dampness or suspected mould develops, stop using it and contact us about the next step.
5. Shake and redistribute once fully dry
When the whole pillow is dry, shake it thoroughly to loosen and redistribute the filling. Check that the head, neck and side areas feel evenly arranged within your chosen setting.
Washing can change how the filling is distributed. Check the pillow again on your usual mattress before deciding that it needs more material. You may simply need to redistribute it.
Then put on a clean, compatible pillowcase and any suitable protective encasing you normally use. Your pillow is ready for bed when the inside is dry too.
Frequently asked questions
Can I wash the filling together with the pillow?
Yes. Lunarto is designed to be washed as a complete pillow, with the filling inside, at 40 degrees C on a gentle cycle.
Can I tumble dry it on a low setting?
No. Air drying is our instructed method.
Must I remove filling before washing?
No. Removing filling is for fit adjustment, not a necessary preparation for whole-pillow washing.
How often should I wash it?
Wash when needed for your use and hygiene routine. We do not prescribe an unsupported universal interval for every household. Wash the separate outer pillowcase according to its own instructions.
What if it feels lumpy afterwards?
Finish drying first, then shake and redistribute.