The zip is open. The filling is within reach. The temptation is to fix every area at once.
Pause for one baseline check. Try Lunarto as supplied in your usual positions, identify a specific mismatch, then make one small change. That gives the next setting something useful to tell you.
On this page
Start with one adjustment question
-
Try the original setting in your normal positions with a compatible cover before removing filling.
-
Identify the mismatch and its area. Check placement or cover tension first if the complaint is contact pressure.
-
Make one small permitted change, close the pillow and repeat the position check. Keep removed material so the change is reversible.

Prepare your first check
Read the included orientation and handling instructions. Use your usual mattress and a compatible pillowcase. Put a clean, dry container nearby for any filling you remove.
Inspect the closure and seams. If access is unclear, ask support rather than pulling at the construction.
Side sleeping
Check working height and ear contact separately. If the height is the issue, identify the area supporting your head in that position.
Change only the intended accessible area, following the product instructions. Close the pillow completely before reassessing. Do not assume that adding filling is appropriate whenever you have broad shoulders.
Back sleeping
Notice the head and neck regions separately. If the back of the head feels elevated while the neck area is comfortable, avoid automatically removing filling everywhere.
A small local change is easier to understand and reverse.
Stomach or mixed positions
For stomach sleeping, first decide whether the basic shape can become comfortable enough for you. Removing filling does not eliminate the structure.
For mixed positions, test a natural turn with one setting. If you must rebuild the pillow for each position, reconsider whether the construction suits your habits.
Keep a useful record
| Setting | What to note |
|---|---|
| Starting point | Position, cover and initial feel |
| Change | Which area and what was altered |
| Immediate result | Head height and local contact |
| Later observation | Comfort after use |
| Next decision | Keep, reverse, ask for help or stop |
A short record is enough to keep the comparison understandable.
When to pause
Stop a change that causes pain or worsening symptoms. You do not need to wait a prescribed number of nights to decide that a setting is clearly uncomfortable.
If you cannot reach the filling safely, contact support. Do not cut seams or use tools to widen access.
Which zone should I start with? The one relevant to a clearly identified mismatch, using the orientation guide.
How much filling should I remove? Use a small reversible change; no universal body-weight formula can determine your preferred setting.
Begin with what you feel, identify the area, then change a little. Leave a setting alone when it already feels comfortable.